LUTZE DRIVEFLEX® XLPE (C) 2kV SYMMETRICAL

VFD XLPE 3 (C) PVC (3×AWG2+3×AWG10)

A2190203

Series

• Dual-shielded motor supply cable to connect power to 3-phase-motors, VFDs and servo drives
• Three insulated symmetrical ground design helps to reduce stray currents
• 2kV cable design for the most demanding VFD applications
• Cable design for harsh industrial environments and operating conditions with high noise levels
• Thermoset XLPE insulation offering superior overload and short-circuit temperature
• Increased wall thickness insulation type RHW-2, offering lower capacitance and higher impedance making it ideal for applications with high voltage spikes and long cable runs
• Compliant with NFPA 79 requirements
• TC-ER for use with cable trays without conduit, which can reduce installation costs in industrial environments
• WTTC – wind turbine tray cable rating for use in wind power generation
• Dry, damp or wet conditions

• Flexible XLPE conductors
• Three symmetrical grounds (PE)
• High insulation resistance
• Low capacitance cable
• Effective dual layer shield for EMC compliance
• Specially formulated jacket for oil resistance and easy strip design
• Non-wicking fillers
• Ecolab certified resistance to common cleaning agents and chemicals used in food and beverage washdown procedures
• Crush impact resistant
• Gas/vapor-tight sheath per UL 1277
• Sunlight resistant
• Flame retardant
• Direct burial
• Talc free and silicone free